ー The Cosplay manufacture process ー

Picture 07 The kind of surface material, and adhesives paint to it A surface material is stuck on the urethane (form) parts which it finished processing. Although it is the surface material to be used, a vinyl material and a leather are mainly used. respectively -- alike -- various kinds -- since various colors exist, please choose a favorite color, textures, and the ease of using according to a use If selection of a surface material finishes, exclusive adhesives will be applied to the reverse side in order to stick on urethane (form). A photograph is a material called metallic enamel.。
			Picture 08 Adhesives paint to urethane (form) Adhesives are applied also to the surface of urethane (form) parts. Although it must apply to the whole uniformly, there are some tips. For adhesives with quick dryness, you have to apply quickly. Moreover, since MURA must not be taken out, either, the work which served both as speed and correctness is needed. It is because the MURA will loom in a table through a surface material and a result will become dirty somewhat, if MURA is taken out.
Picture 09 Adhesion of a surface material and urethane (form) (in the case of plane composition) Both parts will join adhesion sides, if adhesives get dry to some extent. You make it stuck by pressure, taking care and driving out air, since air tends to enter. Although a surface material is stuck so that urethane parts may be wrapped, adhesion stabilized when it stuck so that it might insert in to the inside back can be desired..
			Picture 10 Adhesion of a surface material and urethane (form) (in the case of curved surface composition) Although it does not change with plane tension fundamentally, you have to change how to stick in the size of the elasticity of cloth.
Picture 11 The last check of each part If it finishes sticking a surface material on each urethane part, the surface is made to stick by pressure once again in the sense of a check.
			Picture 12 Adhesion of each part (the 1) Each urethane parts are joined. Here, parts are pasted up using a quick-drying glue. (It is still more effective if an adhesion catalyst is applied at the moment)
Picture 13 Adhesion of all parts The whole of each planned part is pasted up. (Photographs are head finished goods)
			Picture 13 Completion If all work is completed, the last adjustment of maintenance will be carried out to equip with it. It becomes, and it becomes and each part article is adjusted by the method according to the situation of stopping with a rope stopped on a piece of Velcro.

TOP